Installing a Brick Paver Walkway or Brick Packaging Machines

Using Installing a Brick Paver Walkway or Brick Packaging Machines or Pavers to produce a walkway or patio area complements a home in a manner in which is unmatched. It includes a level of quality and sophistication to a home entrance that can not be accomplished with either concrete or asphalt. Brick and Pavers also can be found in several colors and shapes enabling unique color schemes and patterns to be achieved. In addition, installing a Brick or Paver walkway does not necessarily require a pro. With some fundamental knowledge and a reasonably simple sidewalk plan, a house owner is capable of undertaking such a task.

The secret to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be installed. In addition, string lines need to be strung on each side of the pathway.
As soon as the area has actually been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. Then 2" of sand, or stone dust must be topped the gravel. Once again the sand/stone dust ought to be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipeline or journal board the length of the walkway on either side of the pathway. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will function as your walkway border and assistance to keep the integrity and shape of the pathway. You can get these plastic strip borders at many home improvement shops. The strips ought to be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

Once this is done, you can then start to lay the bricks/pavers. There are lots of patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist preserve the integrity of the walkway.

Inevitably bricks/pavers will need to be cut or divided when constructing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you want to break the brick. read more If your walkway has curves you will need to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the brand-new walkway and sweep into the fractures. This will complete the interlocking of the bricks and help to eliminate any weed development.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The key to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipeline or journal board the length of the pathway on either side of the sidewalk. These strips will act as your walkway border and aid to preserve the integrity and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or divided when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *